Extron electronic MPX PLUS 866 A Switch User Manual


  Open as PDF
of 222
 
Operation, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
3-46
PRELIMINARY
Performing a system reset from the front panel
The front panel reset is identical to the
E
ZXXX
}
SIS command (see chapter 4,
“SIS Programming and Control”). A system reset:
• Clearsallties
• Clearsallpresets
• Clearsallvideoandaudiomutes
• Setsallinputaudiolevelstounitygain(+0dB)
• Setsalloutputvolumelevelsto100%(0dBofattenuation).
Reset the switcher to the factory default settings by pressing and holding the Video
button and Audio button while you apply AC power to the switcher.
N
System reset does not reset the Internet protocol (IP) settings or replace user-
installed firmware.
Power
I / O
VIDEO AUDIO
Press and hold the Video and Audio buttons
while you apply power to the switcher.
The switcher flashes the button indicators green, red, and
amber and then turns them off.
Continue to hold the Video and Audio buttons until all input and output buttons return
to either unlit or to background illumination and the Video and Audio buttons turn on.
Release the Video and Audio buttons.
 previous next