Extron electronic MPX PLUS 866 A Switch User Manual


  Open as PDF
of 222
 
Switcher Software, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
5-18
PRELIMINARY
Deleting a group master
Delete a group as follows:
1
. Click Tools > Configure GroupstoopentheCongureGroupsdialogbox.
N
Or, click View > Group Controls and then click the Add a Group menu
selection.
2
. IntheSelectGroupdrop-downbox,clickanumberedgroup(suchas
“Group#1“)toselectit(gure5-11).
3. Click Delete Current Group.
4
. Click Yes in the Confirm Deletion dialog box.
Viewing and using a group master
Click View > Group Controls
toopentheGroupControlsdialogbox(gure5-12).
Figure 5-12 — Group Controls dialog box
• Slideagroupfaderupanddowntoadjustallgaincontrolsinthegroup.
• Clickanddragasoftlimit( ) to set the ceiling or floor for the group.
N
The soft limits cannot be dragged beyond the current setting of the group fader;
the ceiling cannot be set below the fader and the floor cannot be set above the
fader.
N
None of the individual gain faders can be dragged below the floor or above the
ceiling of the group’s soft limits.
• Clickanddragasoftlimit( ) to set the ceiling or floor for the group.
• ClicktheMute button in a mute group to mute or unmute all blocks in
the group.
N
If a block is muted, that block remains muted when the group mute is released.
• ClickAdd a GrouptoopentheCongureGroupsdialogbox.See
“Configuring a group master“ and figure 5-11.
• ClickTools > Clear All Groups to delete all groups.
 previous next