Filter
Top Products
Operation, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
3-14
PRELIMINARY
Example 2: Adding a tie to a set of computer video and audio ties
In the following example, a new video tie is added to the current configuration.
The steps show the front panel indications that result from your action.
N
This example assumes that you have performed example 1.
1
. Clear all selections: Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press and release the Esc button.
The button flashes once.
2. Select video only for the tie: If necessary, press and release the Video button
and the Audio button.
I / O
VIDEO AUDIO
Press the Video button to toggle on and off.
The button lights green when selected.
Press the Audio button to toggle on and off.
The button is unlit or background illuminated when deselected.
3. Select an input: Press and release the input 5 button.
COMPUTER INPUTS
1
2
3
4
5
6
7
8
1
2
3
4
5
6
COMPUTER OUTPUTS
Press and release the Input 5 button.
The button lights green to indicate that the video signal on this
input will be tied to or untied from the output(s) you select next.
The Output 3, Output 4, and Output 6
buttons light green to indicate the
video ties created in example 1.
4. Select the output: Press and release the output 1 button.
1
2
3
4
5
6
The Enter button blinks
green to indicate the need to
confirm the change.
C O N T R O L
PRESET
ENTER
ESCVIEW
COMPUTER/AUDIO OUTPUTS
Press and release the Output 1 button.
The button blinks green to indicate that the selected
RGBHV input only will be tied to this output.