Extron electronic MPX PLUS 866 A Switch User Manual


  Open as PDF
of 222
 
B-3
MPX Plus 866 A Media Presentation Matrix Switcher • DSP SIS Commands
PRELIMINARY
Symbol definitions
]
= CR/LF (carriage return/line feed) (hex 0D 0A)
}
= Carriage return (no line feed, hex 0D)
• = Space character
|
= Pipe (vertical bar) character
* = Asterisk character (which is a command character, not a variable)
E
= Escape key (hex 1B) (use W instead of Esc for Web browsers)
X6)
= Gaincontrolormicmix-point SeethetablesonpageB-4andB-5.
X6!
= Level value; pre-matrix (
a
), post-matrix (
c
), and mic-mix (
d
) See the table on page B-6 through B-8.
-35 dB to + 25 dB, in 0.1 dB increments.
N
Pre-matrix and post-matrix, -12 dB to +12 dB only.
X6@
= Mic/line gain level value See the table on page B-8.
0 dB to +80 dB, in 1.0 dB increments.
X6#
= Mute status 0 = unmute
1 = mute
X6$
= Groupmastergroupnumber 01 – 32 (repeated as
X2)
in chapter 4,”SIS Programming
and Control”)
X6%
= Groupfadersetting dBvalue,in0.1dBincrements.Thevalidrangedepends
on the type of gain block that is assigned to the group
number (
X6$
) specified in the command:
a
= -120 to +120 (-12.dB to +12.0 dB)
b
= 000 to 800 (0.00 dB to 80.0 dB)
c
= -1,000 to +120 (-100.0 dB to +12.0 dB)
d
= -350 to + 250 (-35.0 dB to + 25.0 dB)
e
= -180 to +240 (-18.0 dB to +24.0 dB)
f
= -640 to 000 (-64.0 dB to 0.00 dB)
X6^
= Groupfaderoffset dBvalue,in0.1dBincrements,toraiseorloweragroup
fader
X6&
= Groupfadersoftlimit dBvalue,in0.1dBincrements.Thevalidrangemustbe
within the range for the gain block grouped in
X6%
.
X6*
= Grouptype 6=gain(
a
through
d
) 12 = mute
18 = gain (
e
and
f
)
X6(
= Personal Identification Number (PIN) Four numeric digits, default = 0000
X7)
= Protected configuration status 0 = no protected configuration saved
1 = protected configuration saved
 previous next