Filter
Top Products
6-13
MPX Plus 866 A Media Presentation Matrix Switcher • HTML Operation
PRELIMINARY
5. Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N
Note the folder to which the firmware file is saved.
6. Click Finish to exit the program.
7
. Connect the PC to the matrix switcher via the switcher’s Ethernet port.
8. Access the matrix switcher using HTML pages.
9. Click the Configuration tab.
10
. Click the Firmware Upgrade link.
11
. Click the Browse button. An open file window appears.
12
. Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N
Valid firmware files must have the file extension ‘.S19’. Any other file extension
is not a firmware upgrade.
N
The original factory-installed firmware is permanently available on the matrix
switcher. If the attempted firmware upload fails for any reason, the switcher
automatically reverts to the factory-installed firmware.
13
. Click the Open button.
14
. Click the Upload button. The firmware upload to the switcher may take a few
minutes.