Filter
Top Products
Switcher Software, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
5-26
PRELIMINARY
6. If you want to tailor the push to the switcher (push just the configuration,
just the presets, or the configuration and selected presets), click the Advanced
button and proceed to step 6a.
To push all of the DSP Configurator ties, gain and processor blocks, and
presets to the switcher, proceed to step 7.
a
. Select the Custom radio button.
b
. Select the desired checkbox(es); Push Configuration and/or Push
Presets.
N
Configuration includes all ties, mic mixes, and gain and processor blocks. This
selection does not include partial presets.
c
. If you selected Push Presets in step 6b, select either the All or Selected
checkbox.
If you selected Selected, proceed to step 6d.
If you selected All (equivalent to a standard push), proceed to step 7.
d
. If you selected Selected in step 6c, the Synchronize with Device dialog
box reappears. Click OK.
e
. Select the desired partial presets to push by clicking in the appropriate
checkbox(es).
f
. Click OK. — Proceed to step 8.
7
. Click OK. The DSP Configurator program is connected live to the switcher
and the ties, processors, and presets are pushed or pulled as selected,
completing the selection of Live mode.
8
. If you have created ties or made any changes to the DSP parameters
(including gain and/or processor blocks) since the last time you saved to a
file, the DSP Configurator prompts you to save the file. Click Yes or No, as
desired,
If a password was required and not entered or if an incorrect password was
entered, the program prompts for the password.
DSP Configurator Windows menus
DSP Configurator File menu
N
New, Open, and Recent Files are unavailable in
Live mode.
New — Discards the current DSP configuration (after
prompting to save any changes) and opens a blank
configuration file with no inserted processors, saved
partial presets, created ties, or mic mixes.
Open — Loads and activates a previously saved DSP
configuration file.
Save — Saves all changes to the current DSP configuration
file under the current file name. If the file has not
previously been saved the program prompts for a file
name.
Save As — Saves all changes to the current DSP configuration file under a new file
name.
Backup — Transfers all partial presets plus the current configuration to a DSP
configuration file within the DSP Configurator program.