Extron electronic MPX PLUS 866 A Switch User Manual


  Open as PDF
of 222
 
Switcher Software, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
5-22
PRELIMINARY
3. Mark the desired gain and/or processor blocks:
a. Click a processor block. The block is marked by a green outline ( ).
The processor block and all of its settings is selected to be saved as a
preset.
b
. Ctrl-click additional processor blocks as desired.
H • Tomarkmultiplesuccessiveprocessorblocksina
chain,useright-click>Mark Row.
4
. Save the preset:
a. Click Tools > Presets > Save Presets.
The Save a Preset dialog box appears.
b. As desired, enter a specific preset number
c
. As desired, enter a preset name.
N
Unlessyouenteraspecicnumberand/orname,theDSPCongurator
programentersthenextsequentialunusedpresetnumberandthename“Preset
{number}.
d
. Click OK.
Recall a Preset
Recall a preset as follows:
1
. Select the desired preset in the Presets drop-down menu (figure 5-16).
The selected preset appears in the Presets window, marked processors appear
indicated by green boxes, ties that will be loaded as part of the preset are
shown by dashed lines, and ties that will be eliminated by the preset are
indicated by the output node highlighted in green.
1
2
Figure 5-16 — Recalling a preset
N
TheRecall,Cancel,andDeletebuttonsappearwhenapresetisselected.
N
Anasteriskinthedrop-downlistindicatesthatapartialpresetthatonlyexists
intheswitcherhasnotbeensavedtotheDSPCongurator’scongurationle.
Thepreset’stiesandsettingsarenotinsyncbetweentheDSPCongurator
programandtheswitcher.
Presetsmarkedwithanasteriskshouldberecalledandthenthecurrent
DSPConguratorsettingssaved.ClickFile>SaveorFile>Save As.
N
Itmaytakeuptotwosecondsforthepresetdatatoread-ininLivemode.
2. Click Recall to load and make active the selected preset.
H
• ClickCanceltoabandonthepresetrecall(butnotdeletingthepreset)and
returntothecurrentconguration.
• ClickDeletetopermanentlyerasethepreset.
 previous next