Filter
Top Products
6
6-27GFK-0787B Chapter 6 Configuration
Configuring the Input Subsystem for a Bus Controller Group
With the rack and slot locations for a bus controller group configured, the next step is to
configure the input subsystem for that bus controller group.
Click on Insert or press ALT–I to display the Insert menu. Select Input Group from the
menu by clicking on that item or by pressing [I]. Click on the type of group to insert, or
press its highlighted letter key, or use the cursor keys to select an item then press the
Return key to display a sub-menu of input block types:
From this menu, select and configure the types of input groups in the input subsystem.
Select: To Configure:
triplex discrete each group of three input blocks
duplex discrete each group of two input blocks
simplex discrete each “group” of one input block
analog each group of analog blocks
After you select the group type, additional configuration screens appear for configuring
the GMR features for that group. See the instructions on the following pages.
Exiting a Block Group Window
When you have completed a block group screen, you can continue to configure another
block group.