Filter
Top Products
122
S:\HP83206A\USRGUIDE\MANUAL\meas.fm
Chapter 4, Making Measurements
Frequency Error
Frequency Error
Frequency error is measured in either Connect state or test mode. The
measurement procedure described below is for the Connect mode. To measure in
the test mode, see “Test mode measurement procedure” on page 118.
TX frequency error measures the difference between the measured frequency and
the frequency that the Test Set is tuned to.
TX frequency error measurement procedure
1. Make sure the Test Set is in Connect state. See
“Registration” on page 93.
2. Select
Meas
from the
Data/Meas
field.
3. Freq error is displayed.
Figure 41 Frequency Error Display
Cm-meas.tif