Filter
Top Products
140
S:\HP83206A\USRGUIDE\MANUAL\meas.fm
Chapter 4, Making Measurements
TX Power
Measuring
Absolute TX Power
on an AVC
To measure absolute TX Power when a mobile is in the Connect state, use the
following measurement procedure. To measure absolute TX Power when the
mobile is in the Test mode, select
ANLG MEAS (from the To Screen list) to
display the ANALOG MEAS screen.
TX Power measurement procedure
1. Establish a call between the mobile and the Test System on an analog voice channel.
When established, the
Connect
indicator on the CALL CONTROL screen is ‘lit’ and
the
Traffic Chan Assignment
-
Type:
indicates AVC. See
“Registration” on
page 93
.
2. Select
Meas
from the
Data/Meas
field.
3. Absolute TX Power is displayed, along with other relevant analog measurements.
Figure 54 Measuring TX Power on an Analog Voice Channel (AVC)
Read
Absolute
TX Power
Confirms
AV C
To go to the
ANALOG MEAS
screen.
Abstxpwr.tif