Filter
Top Products
215
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
Screen and Field Descriptions
Order Settings: Chng PL 0 through 10, Send MWI, and Send SMS for DTC; Chng PL 0
through 7, MAINTEN, and ALERT for AVC
Units: None.
These are the available orders that can be sent to the mobile when in the connect
state. The field name is changed to
Cntl Order or CC Order (when
authentication is turned on), and the choices are changed, when the mobile is not
in the connect state.
Note that the available choices in the
Order field are valid choices for the current
channel only.
See also, “Which Control Order Command Should I Use?” in the HP 8920B
Option 801 Condensed Programming Reference.
Page Settings: This is an immediate action field. Selecting it starts the action.
Units: None.
Page is both an annunciator and a command. This command instructs the Test Set
to page the mobile identified in the
MS ID field. The annunciator indicates the
Test Set is sending the Page message.
Figure 67 The Page Command and Annunciator Display (CALL CONTROL Screen)
Page
Page
Command
Annunciator