Filter
Top Products
219
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
Screen and Field Descriptions
VC Order Settings: Chng PL 0 through 10, Send MWI, SSD Upd, Uniq Ch, and Send SMS.
Units: None
These are the available orders that can be sent to the mobile when in the connect
state when authentication is turned on. If authentication is not turned on, and the
mobile is in the connect state, this field name is changed to
Order.
The field name is changed to
Cntl Order or CC Order (when authentication is
turned on) when the mobile is not in the connect state.
See also, “Which Control Order Command Should I Use?” in the HP 8920B
Option 801 Condensed Programming Reference.
Voc Settings: VSELP or ACELP
Units: None
Select the type of vocoder used by the mobile. This field is displayed only when
the system type is DCCH.
Voice Channel
Assignment
Settings: this is a group of fields (Type, Chan, Pwr Lvl, SAT)
Units: None.
A group of fields associated with an Analog Voice Channel. See also Traffic
Channel Assignment.