Filter
Top Products
260
S:\HP83206A\USRGUIDE\MANUAL\trblesht.fm
Chapter 9, Troubleshooting
Problems With or Without a PCS Interface Present
The message
“Symbol clock is
weak: accuracy is
degraded” is
displayed.
The DIGITAL MEASUREMENTS screen expects to see a symbol clock to be
able to make measurements on a DTC. This message occurs when accessing this
screen while the mobile is on an AVC; a situation where a symbol clock is not
normally present.
If this message is displayed while measuring a DTC, increase the signal level of
the mobile until this message is no longer displayed.