Filter
Top Products
37
Chapter 1, Getting Started
Get ready to test
Getting Started
Going to the
TIA/EIA-136
CALL CONTROL
Screen
In order to begin testing TIA/EIA-136 mobiles, the Test System must be at the
CALL CONTROL screen. In this screen, you can select the TIA/EIA-136 system,
control basic call processing functions, and make measurements.
How to access the TIA/EIA-136 CALL CONTROL screen
1. Make sure you have already done the following:
• Zeroed the RF Power meter
• Selected the proper audio filter, if you will test audio
2. Select
CALL CNTL
from the
To Screen
. The CALL CONTROL screen will be
displayed.
3. Select
DCCH
from the
System Type
field. Now the CALL CONTROL screen shows
the parameters necessary to test the digital portion of TIA/EIA-136 mobiles.
Figure 4 How to Access the DCCH CALL CONTROL Screen
CALL CNTL
System Type
More
rx-test.tif
callcont.tif