Filter
Top Products
83
Chapter 3, Processing Calls
Handoff
Processing Calls
Handoff
See “Program Example” on page 149 for an example of the equivalent HP-IB
command.
1. Verify that the Test Set is in the Connect state (“Page” on page 91).
2. In the Traffic Chan Assignment section of the screen (or Voice Chan Assignment if you
are on an AVC), you must now set the following parameters:
Parameters for setting up a handoff
a. Enter the type of traffic channel (DTC or AVC).
b. Select the frequency band (Cellular or PCS)
c. Enter the number of the voice or traffic channel to handoff to.
d. Enter the power level that the mobile will change to.
e. Enter the slot number for the new channel if it is a DTC (or SAT if AVC).
f. Change DVCC, if desired.
3. Select
Handoff
from the list on the left side of the screen.
4. When the handoff is complete, the data for the new DTC or AVC will be displayed on
the screen in the left side of the Traffic or Voice Chan Assignment area.