Filter
Top Products
126
S:\HP83206A\USRGUIDE\MANUAL\meas.fm
Chapter 4, Making Measurements
MAHO
Measuring MAHO
1. From CALL CONTROL screen, set up a call (Test Set must be in Connect mode).
2. Select
Meas
from the
Data/Meas
field.
3. Select the field that has appeared below
Data/Meas
.
4. Select
MAHO
from the list of choices.
5. The RSSI and BER of the current channel are reported, as well as the RSSI of the
designated neighbor channels.
Figure 44 MAHO Results
If your tests require that you measure MAHO BER with a known inserted bit error
rate, use the procedure, “Measuring MAHO BER with Inserted Bit Errors” on
page 127.
scrn22.tif