Filter
Top Products
62
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
Chapter 3, Processing Calls
About Call Processing Tasks and Measurements
About Call Processing Tasks and Measurements
The Call Processing subsystem of the HP 8920 and Cellular Adapter can be set up
to emulate a TIA/EIA-136 standard base station.
Primary call processing tasks such as registrations, pages, handoffs, and releases
can be made with just one screen: the CALL CONTROL screen. Some of the
major call processing parameters can also be set on this screen. See “Parameters
of the CALL CONTROL Screen” on page 208
More parameters and features, such as Short Message Services, can be controlled
with the CALL CONFIGURE screen. See “Parameters of the DCCH CALL
CONFIGURE Screen” on page 220
Message Waiting Indicators and Caller ID features are controlled on the CALL
CONFIGURE II screen. See “Parameters of the DCCH CALL CONFIGURE II
Screen” on page 226
Measurements in the Digital test mode can be made in the DIG MEAS screen. See
“Digital Measurement Screen Tests” on page 118.
Measurements on the Analog Voice channel can be made in the Connect state or
the ANLG MEAS screen. See “Analog Parameters” on page 113
Authentication is controlled on the AUTHENTICATION screen. See “Parameters
of the DTC AUTHENTICATION Screen” on page 236