Filter
Top Products
221
Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE Screen
Screen and Field Descriptions
# Systems Settings: 1 through 8
Units: None
Specifies the number of residential or public systems and causes the PSID/RSID
field to be displayed.
% BIT ERROR Settings: 0.00 through 20.00
Units: %.
This sets the percentage (%) of bit errors to be inserted when measuring BER,
WER, or MAHO BER. To insert errors on a DTC, the mobile must be up on a call
before the % bit error can be entered. To insert errors in test mode, set up the
channel first, then enter the % bit error.
Access Burst Choices: Norm or Abbrev
Units: None.
Access Burst selects between a normal burst or abbreviated burst.
BAND (Neighbor
List)
Settings: Cellular or US PCS
Units: None.
This is the frequency band of the channels in the neighbor list.
This field is displayed only when the # Neighbors field is set greater than 0.
Channel (Neighbor
List)
Settings: 1 through 799
Units: None.
This is the channel number of the channels in the neighbor list.
This field is displayed only when the # Neighbors field is set greater than 0.
Country Code Settings: 0 through 999
Units: None.
This is the country code as per CCITT E.212