Filter
Top Products
206
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
Chapter 7, Screen and Field Descriptions
The DCCH Call Processing Screens
The DCCH Call Processing Screens
The main screen for this Cellular Adapter is the CALL CONTROL screen. You
can access the CALL CONTROL screen from any of the main HP 8920 screens
(RX Test, TX Test, and so on). You must be in the CALL CONTROL screen with
System Type DCCH to access the other screens available for TIA/EIA-136.
The CALL CONTROL screen controls the TIA/EIA-136 call setup and
maintenance functions. It also displays the data and measurements available. See
“About Call Processing Tasks and Measurements” on page 62 for more
information.
The DCCH CALL CONFIGURE screen provides additional controls for TIA/
EIA-136 features. See “CALL CONFIGURE Screen” on page 54 for more
information.
The DCCH CALL CONFIGURE II screen provides controls to define TIA/EIA-
136 message waiting indicators and caller ID features.
The DIG MEAS and ANL MEAS screens are available for special measurements
of TIA/EIA-136 mobiles. See Chapter 4, “Making Measurements,” on page 4 99
for more information.
The AUTHENTICATION screen allows you to enter parameters for
authentication into the Test Set. These parameters are used by the CAVE
algorithm during Call Processing functions such as registration, page, and
originate to verify a valid call.
DAMPS Call
Processing
DAMPS call control is similar to DCCH call control; however, the DAMPS
screen does not have a digital control channel selection, or vocoder selection, nor
does it operate in the PCS band.