Filter
Top Products
Operator Interface Options
The X200 inverter has a removable keypad, as
shown to the right (part no. OPE-SRmini). This
allows the keypad to operate the inverter
remotely, as shown (below, left). A cable (part no.
ICS-1 or ICS-3, 1m or 3m) connects the modular
connectors of the keypad and inverter.
Hitachi provides a panel mount keypad kit (below, right). It includes the mounting
flange, gasket, keypad, and other hardware. You can mount the keypad with the
potentiometer for a NEMA1 rated installation. The KIT also provides for removing the
potentiometer knob to meet NEMA4X requirements, as shown (part no. 4X-KITmini).
Digital Operator Copy Unit – The optional digital
operator / copy unit (part no.SRW-0EX) is shown to the
right. It has a 2-line display that shows parameters by
function code and by name. It has the additional
capability of reading (uploading) the parameter
settings in the inverter into its memory. Then you can
connect the copy unit on another inverter and write
(download) the parameter settings into that inverter.
OEMs will find this unit particularly useful, as one can
use a single copy unit to transfer parameter settings
from one inverter to many.
NOTE: Copy is possible between X200 series. It is not
possible to copy between X200 series and other models.
Other digital operator interfaces may be available from
your Hitachi distributor for particular industries or
international markets. Contact your Hitachi
distributor for further details.
NOTE: Never turn power OFF while copying (display “Copy CMD!!”). Otherwise the
inverter may lose functionality at next power ON.
1
−
3
Getting started