Filter
Top Products
3-94 Vol. 2A CALL—Call Procedure
INSTRUCTION SET REFERENCE, A-M
THEN
tempRIP ← DEST; (* DEST is r/m64 *)
IF stack not large enough for a 8-byte return address
THEN #SS(0); FI;
Push(RIP);
RIP ← tempRIP;
FI;
IF OperandSize
= 32
THEN
tempEIP ← DEST; (* DEST is r/m32 *)
IF tempEIP is not within code segment limit THEN #GP(0); FI;
IF stack not large enough for a 4-byte return address
THEN #SS(0); FI;
Push(EIP);
EIP ← tempEIP;
FI;
IF OperandSize
= 16
THEN
tempEIP ← DEST AND 0000FFFFH; (* DEST is r/m16 *)
IF tempEIP is not within code segment limit THEN #GP(0); FI;
IF stack not large enough for a 2-byte return address
THEN #SS(0); FI;
Push(IP);
EIP ← tempEIP;
FI;
FI;rel/abs
FI; near
IF far call and (PE
= 0 or (PE = 1 and VM = 1)) (* Real-address or virtual-8086 mode *)
THEN
IF OperandSize
= 32
THEN
IF stack not large enough for a 6-byte return address
THEN #SS(0); FI;
IF DEST[31:16] is not zero THEN #GP(0); FI;
Push(CS); (* Padded with 16 high-order bits *)
Push(EIP);
CS ← DEST[47:32]; (* DEST is ptr16:32 or [m16:32] *)
EIP ← DEST[31:0]; (* DEST is ptr16:32 or [m16:32] *)
ELSE (* OperandSize
= 16 *)
IF stack not large enough for a 4-byte return address
THEN #SS(0); FI;
Push(CS);