Filter
Top Products
3-560 Vol. 2A LSL—Load Segment Limit
INSTRUCTION SET REFERENCE, A-M
Read segment descriptor;
IF SegmentDescriptor(Type)
≠ conforming code segment
and (CPL > DPL) OR (RPL > DPL)
or Segment type is not valid for instruction
THEN
ZF ← 0;
ELSE
temp ← SegmentLimit([SRC]);
IF (G ← 1)
THEN temp ← ShiftLeft(12, temp) OR 00000FFFH;
ELSE IF OperandSize
= 32
THEN DEST ← temp; FI;
ELSE IF OperandSize
= 64 (* REX.W used *)
THEN DEST (* Zero-extended *) ← temp; FI;
ELSE (* OperandSize
= 16 *)
DEST ← temp AND FFFFH;
FI;
FI;
Flags Affected
The ZF flag is set to 1 if the segment limit is loaded successfully; otherwise, it is set
to 0.
Protected Mode Exceptions
#GP(0) If a memory operand effective address is outside the CS, DS,
ES, FS, or GS segment limit.
If the DS, ES, FS, or GS register is used to access memory and it
contains a NULL segment selector.
#SS(0) If a memory operand effective address is outside the SS
segment limit.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and the memory operand effec-
tive address is unaligned while the current privilege level is 3.
#UD If the LOCK prefix is used.
Real-Address Mode Exceptions
#UD The LAR instruction cannot be executed in real-address mode.
Virtual-8086 Mode Exceptions
#UD The LAR instruction cannot be executed in virtual-8086 mode.