Filter
Top Products
3-16 Vol. 2A
INSTRUCTION SET REFERENCE, A-M
3.1.1.12 Real-Address Mode Exceptions Section
The “Real-Address Mode Exceptions” section lists the exceptions that can occur when
the instruction is executed in real-address mode (see Table 3-3).
3.1.1.13 Virtual-8086 Mode Exceptions Section
The “Virtual-8086 Mode Exceptions” section lists the exceptions that can occur when
the instruction is executed in virtual-8086 mode (see Table 3-3).
3.1.1.14 Floating-Point Exceptions Section
The “Floating-Point Exceptions” section lists exceptions that can occur when an x87
FPU floating-point instruction is executed. All of these exception conditions result in
a floating-point error exception (#MF, vector number 16) being generated. Table 3-4
associates a one- or two-letter mnemonic with the corresponding exception name.
See “Floating-Point Exception Conditions” in Chapter 8 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual, Volume 1, for a detailed description of
these exceptions.
18 #MC—Machine
Check
Model dependent machine
check errors.
Yes Yes Yes
19 #XM—SIMD
Floating-Point
Numeric Error
SSE/SSE2/SSE3 floating-point
instructions.
Yes Yes Yes
NOTES:
1. Apply to protected mode, compatibility mode, and 64-bit mode.
2. In the real-address mode, vector 13 is the segment overrun exception.
Table 3-3. Intel 64 and IA-32 General Exceptions (Contd.)
Vector
No.
Name Source Protected
Mode
1
Real
Address
Mode
Virtual
8086
Mode