Filter
Top Products
Vol. 2A 3-619
INSTRUCTION SET REFERENCE, A-M
MOVD/MOVQ—Move Doubleword/Move Quadword
#UD If CR0.EM[bit 2] = 1.
(XMM register operations only) if CR4.OSFXSR[bit 9] = 0.
(XMM register operations only) if CPUID.01H:EDX.SSE2[bit 26]
= 0.
If the LOCK prefix is used.
#NM If CR0.TS[bit 3] = 1.
#MF (MMX register operations only) If there is a pending FPU excep-
tion.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory
reference is made while the current privilege level is 3.