Filter
Top Products
Vol. 2A 3-391
INSTRUCTION SET REFERENCE, A-M
FSTCW/FNSTCW—Store x87 FPU Control Word
#NM CR0.EM[bit 2] or CR0.TS[bit 3] = 1.
#MF If there is a pending x87 FPU exception.
#PF(fault-code) If a page fault occurs.
#AC(0) If alignment checking is enabled and an unaligned memory
reference is made while the current privilege level is 3.
#UD If the LOCK prefix is used.