Filter
Top Products
5-17
Printing Environment Settings
5
SETUP Menu Settings
FEEDER MENU Options
TRAY PAPER SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, ENV.
ISO-C5, ENV. COM10, ENV. MONARCH, ENV. DL, ENV. ISO-B5, A5, B5
Specifies the size of the paper loaded in the multi-purpose tray.
IMPORTANT
When you change the paper loaded in the multi-purpose tray frequently, it is
convenient if TRAY PAPER SIZE is set to MIXED SIZES. If TRAY PAPER SIZE is
set to MIXED SIZES, you do not need to specify the setting for TRAY PAPER SIZE
each time you load the different size paper. However, observe the following when
specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the multi-purpose tray matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the multi-purpose tray before using
the printer. However, if SPECIAL MODE J (See p. 5-36) is set to ON, the printer
prints without checking the paper size even when the paper size specified in the
printer driver and the size of the paper loaded in the multi-purpose tray do not
match.
- When printing from UFR II Printer Driver, you can load paper either in portrait or
landscape orientation. However, when printing custom size paper of its long
edges 215.9 mm or less, load the paper in landscape orientation. When you are
not using UFR II Printer Driver, load the paper in portrait orientation.
NOTE
•
Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press [Online] to clear the error before
printing again.
•
You cannot print on any area within 10 mm of the edges of an envelope. (If you
have selected the [Print with Upper Left of Sheet as Starting Point] check box in
[Finishing Details] in the printer driver, you can extend the printable area to near
the edges of the paper. For more details, see Help of the printer driver.)
•
You can obtain the same result by specifying the setting for TRAY PAPER SIZE in
the SELECT FEEDER menu.