Filter
Top Products
3-26
Printing from the Paper Cassette
Loading and Outputting Paper
3
IMPORTANT
Do not use the "8.5 x 13" position.
3
Load the paper stack so that the rear edge is aligned with the
paper guide.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
•
Be sure to check if the paper guide is at the position of the size of the loaded paper.
If the paper guide is set at a wrong position, this may result in misfeeds.
•
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, flat surface.
NOTE
•
If you want to print custom size paper of its long edges 215.9 mm or less when
CASSETTE1 SIZE and/or CASSETTE2 SIZE in the FEEDER MENU options in the
SETUP is set to MIXED SIZES, specify the settings according to the printer driver
you are using as follows.
When using UFR II Printer Driver: Load the paper in landscape orientation
When not using UFR II Printer Driver: Load the paper in portrait orientation
Cassette 1 Cassette 2