8-34
Appendix
8
Specifications
Controller Specifications
Software Specifications
CPU
R4000-333MHz*
* The upper limit of the frequency range
Memory (RAM)
capacity
Standard 64 MB
Expandable up to 320 MB by installing an optional expansion
RAM module
Host interface
USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 equivalent) X 1
LAN connector (10BASE-T/100BASE-TX) X 1
User interface
LCD 16 characters X 1 line
8 LED indicators
8 Operation keys
RAM slot 1
ROM slot 1
Expansion slot 1
Command language PCL5e, PCL6, UFR II
Built-in fonts PCL: 80 Scalable fonts, 10 Bitmap fonts
Printable area
PCL5e, PCL6
Data cannot be printed within a 4.23 mm (10 mm for
envelopes) margin on all sides of the paper.
UFR II
Data cannot be printed within a 5 mm (10 mm for
envelopes) margin on all sides of the paper.
* If you have selected the [Print with Upper Left of Sheet as
Starting Point] check box in the [Finishing Details] dialog
box in the printer driver, you can extend the printable area
to near the edges of the paper. However, when a
document with no margins is printed, the data may be
printed with the edges missing or the edge of paper may
blot during color printing even if the [Print with Upper Left
of Sheet as Starting Point] check box is selected. In this
case, specify the scaling factor in the driver to print
smaller so that any data on the document will not miss,
and then print again.