Filter
Top Products
7-27
Troubleshooting
7
Message List
<32 2-SIDED ERROR> <Error Skip>
Cause 1 Paper on which automatic 2-sided printing cannot performed is selected.
Remedy Select a standard paper size for the paper source and paper size setting in the
computer, and then print again.
Cause 2 The memory for performing 2-sided printing cannot be secured.
Remedy Increase the free space of RAM using the following procedure, then print again.
• Delete the registered data.
• Install an optional expansion RAM module. (See Getting Started Guide)
Cause 3 The printer received data for 2-sided printing on which the printer cannot
perform automatic 2-sided printing.
Remedy 1 The printer continues printing by pressing [Online]. However, the data on each
side is printed on two pages.
Remedy 2 Perform a soft reset in the RESET menu, change the paper size of the data to
the one on which the printer can perform 2-sided printing, and then print again.
<33 WORK MEM.FULL> <Error Skip>
Cause The work memory for each operation mode cannot be secured.
Remedy 1 The printer continues printing by pressing [Online]. However, the data with
which an error has occurred is not printed properly.
IMPORTANT
When you continue printing by pressing [Online], be aware that the data of overlay or
macro that is already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedure, and then print again.
• Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
• If you are using UFR II Printer Driver, install an optional expansion RAM
module. However, the problem may not be solved even after the expansion
RAM module is installed.
<35 TABLE FULL> <Error Skip>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.