Filter
Top Products
7-45
Troubleshooting
7
When You Cannot Obtain Appropriate Printout Results
Toner does not fix well.
Cause 1 Paper is inappropriate.
Remedy Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 3-2)
Cause 2 Toner does not fix onto paper completely.
Remedy Select the appropriate fixing mode from [Fixing Mode] in the printer driver.
In order to specify the setting for [Fixing Mode], display the [Advanced Settings]
dialog box by clicking [Finishing Details] in the [Finishing] sheet, and then
clicking [Advanced Settings] in the [Finishing Details] dialog box. [Mode 3]
enhances the toner fixing the most, and [Mode 2] and [Mode 1] follow
respectively. [Mode 4] enhances the toner fixing the least.
The back of the printed paper has smudge marks.
Cause The size of the print data was larger than that of the loaded paper.
Remedy Check if the size of the print data matches that of the loaded paper.