Filter
Top Products
5-29
Printing Environment Settings
5
SETUP Menu Settings
QUALITY CHANGE
CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue printing with the image quality level
being lowered automatically or stop printing, displaying the following error
message when the memory required for the process runs out.
If CONT.PRINTING is specified, the printer prints with the image quality level
being lowered automatically without displaying a message.
If STOP PRINTING is specified, the printer stops printing, displaying a message.
In this case, the printer resumes printing with the image quality level being
lowered by pressing [Online].
NOTE
When the message <38 LOW IMGE QLTY> appears frequently by specifying
STOP PRINTING for this item, perform the following procedure.
1.
If GRADATION LEVEL is set to HIGH, set it to STANDARD. If you do so,
however, the printer prints with the gradation level of the data being lowered.
2. When the message still appears after applying the Remedy 1, or when you
want to print with the gradation level of the data as it is, install an optional
expansion memory module (RAM).
Error Message Setting
<38 LOW IMGE QLTY>
When the printer receives a large amount of data or
complicated data, the memory required for the
process may run out, and the printer may print with
the image quality level being lowered automatically.
Specify whether the printer should display an error
message when the printer is in this status.