Filter
Top Products
3-38
Printing from the Multi-purpose Tray
Loading and Outputting Paper
3
Printing from the Multi-purpose Tray
The multi-purpose tray can be loaded with plain paper (64 g/m
2
) at sizes of A4, B5,
A5, Legal, Letter, Executive, and paper at the following custom sizes.
• Custom Size Paper
When loading paper in portrait orientation: Width 76.2 to 215.9 mm; Length 127.0
to 355.6 mm
When loading paper in landscape orientation: Width 127.0 to 215.9 mm; Length
127.0 to 215.9 mm
Paper that cannot be loaded in a paper cassette such as transparencies and
envelopes can be loaded in the multi-purpose tray.
When printing from the multi-purpose tray, you need to specify the following
settings.
IMPORTANT
Match the setting for TRAY PAPER SIZE in the SETUP menu of the printer and that in the
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting for TRAY PAPER SIZE is changed to that in the printer driver by
pressing [Online], allowing you to continue printing.
NOTE
If you are printing from an operating system on which the printer driver cannot be used,
previously specify the paper source to TRAY. (See p. 3-12)
■ Loading Paper in the Multi-purpose Tray (See p. 3-39)
■ Specifying the Size of the Paper in the Multi-purpose Tray (See p. 3-51)
The FEEDER MENU options in the SETUP menu
• TRAY PAPER SIZE = the size of the loaded paper
When printing from DOS, UNIX, or other operating system on which the printer driver
cannot be used, specify the following settings in addition to TRAY PAPER SIZE.
The FEEDER MENU options in the SETUP menu
• STD PAPER SIZE = the size of the loaded paper (See p. 5-19)
• STD PAPER TYPE = the type of the loaded paper (See p. 5-21)