Filter
Top Products
2-3
Using the Printer
2
Turning the Printer ON/OFF
If no abnormality is found during the self-diagnostic test, the Online indicator,
Ready indicator and Paper Source indicator for the currently selected paper
source come on, <00 READY> appears in the display, and the printer is ready to
print.
The following information is displayed in the display.
Turning the Printer OFF
Turn the printer OFF using the following procedure.
IMPORTANT
•
If the printer is connected to a network, make sure that other computers are not sending
print data to the printer before turning the printer OFF.
•
If you turn the printer OFF when the Job indicator is on, all the print data remaining in the
printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press [Reset] in the offline state and then select FORM
FEED to output the data before turning the printer OFF. (See p. 2-9)
•
Do not turn the power OFF when the printer is in any of the following status:
- During printing
-While the printer is running a self-diagnostic test immediately after turning the power
ON
-While a message informing you that the NVRAM is being initialized or being written is
displayed
-While <02 WARMING UP> is displayed
Online Indicator
Ready Indicator
Paper Source Indicator
00 READY A4
Printable and not
processing print data
Size of paper in the currently
selected paper source