Filter
Top Products
3-36
Printing from the Paper Cassette
Loading and Outputting Paper
3
•
When you change the paper loaded in the paper cassette frequently, it is convenient if
you set CASSETTE1 SIZE and/or CASSETTE2 SIZE to MIXED SIZES. When
CASSETTE1 SIZE and/or CASSETTE2 SIZE is set to MIXED SIZES, you do not need to
specify the settings for CASSETTE1 SIZE and/or CASSETTE2 SIZE each time the
different size paper is loaded. However, observe the following when specifying MIXED
SIZES.
- Make sure that the size of the paper loaded in the paper cassette matches the paper
size specified in the printer driver before printing. If they do not match the printer may
stop printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may
occur. Be sure to check if the paper size specified in the printer driver matches the size
of the paper loaded in the paper cassette before using the printer. However, if SPECIAL
MODE J is set to ON, the printer prints without checking the paper size even when the
paper size specified in the printer driver and the size of the paper loaded in the paper
cassette do not match. For more details, see "SPECIAL MODE J," on p. 5-36.
-When printing from UFR II Printer Driver, you can load paper either in portrait or
landscape orientation. However, when printing custom size paper of its long edges
215.9 mm or less, load the paper in landscape orientation. When you are not using
UFR II Printer Driver, load the paper in portrait orientation.
NOTE
The names of the following paper sizes are indicated by an abbreviation.
Legal: LG, Letter: LT, Executive: EX, Custom Size: 80 to 99, Custom SizeR: 80R to 99R,
Free/Mixed Sizes: FR
1
Press [Settings].
2
Select FEEDER MENU using [ ] and [ ], then press [OK].
3
Select CASSETTE1 SIZE or CASSETTE2 SIZE using [ ] and
[], then press [OK].
SETUP
CONTROL MENU
→
FEEDER MENU
→
TRAY PAPER SIZE
→
CASSETTE1 SIZE
→
=A4
→