Filter
Top Products
5-20
Printing Environment Settings
5
SETUP Menu Settings
If ON is specified, the printer detects if the size of the paper in a paper source
matches the paper size of the received data in the following order starting with the
multi-purpose tray.
Multi-purpose Tray ➞ Cassette 1 ➞ Cassette 2 *
1
*1: Only when the optional paper feeder is installed
NOTE
•
If INVLDPAPER TRAY (See the next item) is set to ON, the setting for this item is
ignored, and the printer detects the paper source starting with the paper cassette.
When paper that is the same size as the paper size of the received data is not
loaded in the selected paper source, the printer feeds paper from the multi-purpose
tray.
•
Specify the setting for automatic paper selection in PAPER SOURCE (See p. 5-48)
in the SELECT FEEDER menu.
•
This item is effective only when PAPER SOURCE in the SELECT FEEDER menu
is set to AUTO.
•
Even if ON is specified for this item, the printer does not feed paper from the
multi-purpose tray when the size of the paper in the multi-purpose tray is different
from the paper size of the received data. However, if INVLDPAPER TRAY (See the
next item) is set to ON, a message that prompts you to replace the paper in the
multi-purpose tray appears when the paper that is the same size as the paper size
of the received data is not loaded in the selected paper source.
•
Even if ON is specified for this item, depending on the received data, paper may be
fed not from the multi-purpose tray but from the paper cassette when the Paper
Source indicator for the paper cassette for the paper size of the received data is on.
INVLDPAPER TRAY
OFF*, ON
Specifies what the printer does when paper that is the same size as the paper
size of the received data is not loaded in the selected paper source.
If OFF is specified, a message that prompts you to replace the paper in the paper
cassette appears, and the printer stops printing.
If ON is specified, the printer feeds paper from the multi-purpose tray. If the size of
the paper loaded in the multi-purpose tray is different from the paper size of the
received data, a message that prompts you to replace the paper in the
multi-purpose tray appears, and the printer stops printing. When no paper is
loaded in the multi-purpose tray, or the multi-purpose tray runs out of paper, a
message that informs you of the tray's paper-out condition appears, and the
printer stops printing.
NOTE
If ON is specified for this item, the settings for TRAY in AUTO SELECTION (See the
next item) and TRAY PRIORITY (See the previous item) are ignored, and the
printer feeds paper from the multi-purpose tray when paper that is the same size as
the paper size of the received data is not loaded in the selected paper source.