Filter
Top Products
5-18
Printing Environment Settings
5
SETUP Menu Settings
CASSETTE1 SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, A5, B5
Specifies the size of the paper loaded in the paper cassette in the printer unit
(Cassette 1).
IMPORTANT
When you change the orientation of the custom size paper loaded in the paper
cassette frequently, it is convenient if CASSETTE1 SIZE is set to MIXED SIZES.
When CASSETTE1 SIZE is set to MIXED SIZES, you do not need to specify the
setting for CASSETTE1 SIZE each time you change the paper orientation.
However, observe the following when specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the paper cassette matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the paper cassette before using the
printer. However, if SPECIAL MODE J (See p. 5-36) is set to ON, the printer prints
without checking the paper size even when the paper size specified in the printer
driver and the size of the paper loaded in the paper cassette do not match.
-When printing from UFR II Printer Driver, you can load paper either in portrait or
landscape orientation. However, when printing custom size paper of its long
edges 215.9 mm or less, load the paper in landscape orientation. When you are
not using UFR II Printer Driver, load the paper in portrait orientation.
NOTE
•
Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press [Online] to clear the error before
printing again.
•
You can obtain the same result by specifying the setting for CASSETTE1 SIZE in
the SELECT FEEDER menu.
CASSETTE2 SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, A5, B5
Specifies the size of the paper loaded in the paper cassette of the paper feeder
(Cassette 2).
IMPORTANT
When you change the orientation of the custom size paper loaded in the paper
cassette frequently, it is convenient if CASSETTE2 SIZE is set to MIXED SIZES.
When CASSETTE2 SIZE is set to MIXED SIZES, you do not need to specify the
setting for CASSETTE2 SIZE each time you change the paper orientation.
However, observe the following when specifying MIXED SIZES.