Filter
Top Products
5
Properties settings
5-24 Pi4700e
Printer Driver for Linux Chapter 5
✎
Note for (1)
Some paper sizes cannot be selected. For details, refer to the User
Manual of the machine.
✎
Tip for (1)
Set the paper take-up tray using Device Options Setting.
The paper take-up tray used is displayed in green on the Printer Fig-
ure.
✎
Note for (2)
Some paper sizes cannot be selected. For details, refer to the User
Manual of the machine.
✎
Tip for (2)
Set the type of finisher using Device Options Setting.
The paper take-up tray used is displayed in green on the Printer Fig-
ure.
✎
Note for (3)
If you print a document that contains pages of different sizes and/or
different directions in the same job, the image may be partially cut or
images may overlap each other.
Two-sided printing and OHP interleaving cannot be set simultaneous-
ly.
• Short Edge Binding Two-sided printing takes place in such a way that the
short edge is bound.
• Long Edge Binding Two-sided printing takes place in such a way that the
long edge is bound.
(4)
Smoothing
Correct the edges of the printed image.
Available settings: On, Off