Filter
Top Products
Specifying network settings from PageScope Light
3
Pi4700e 3-27
Network Settings Chapter 3
NetWare Configuration
Sub-menus appear when you click the
NetWare Configuration
menu on
the
Network
tab. Use the sub-menus to display and configure the network
interface card settings for NetWare printing.
NetWare Setting
This screen appears when you click the
NetWare Setting
sub-menu un-
der the
NetWare Configuration
menu. It lets you change a number of
NetWare environment settings.
Password Input the password assigned to the network interface card. The
initial factory default is
sysadm
. Clicking the
Apply
button after
inputting the wrong password displays a password error mes-
sage without changing the settings.
Enable NetWare Check this option to enable IPX/SPX on the network interface
card. The NetWare environment is disabled while this option is
unchecked.
Print Server Name Input the print server name you want. The default print server
name when this field is left blank is: MLT_<
Network Interface
Card serial number
>.
Print Server Password When you want to use a password for logging into the network
interface card, type the password you want to specify into the
field. Type the same password into the
Password Retype
field
for confirmation. The password you specify must be the same
as the bindery and NDS-based print server password.