Filter
Top Products
IPX Peer-to-Peer Printing Program (Windows)
3
Pi4700e 3-15
Network Settings Chapter 3
You can use this screen to configure the IPX Peer-to-Peer Printing pro-
gram. If you do not want to change any settings, simply click
OK
to quit
the program. The following describes the contents of this screen.
●
OK
Clicking this button applies the changed settings and exits the pro-
gram.
●
Cancel
Clicking this button exits the program without applying the changed
settings.
●
Clear
Clicking this button clears the contents of the
Available Printers
list,
except for printers whose permanent flag is turned on.
●
Delete
Clicking this button deletes the currently selected printer from the
Available Printers
list. A deleted printer no longer appears in the
printer PORT list. A deleted printer can be re-added using the
Find
Printers
button.
●
Permanent
Clicking this button toggles the permanent flag setting on and off for
the printer that is currently selected in the
Available Printers
list. A
printer whose permanent flag is turned on is not cleared from the
Available Printers
list by the
Clear
or
Delete
button, even if the print-
er is physically removed from the network.
●
Find Printers
Clicking this button searches for available printers on the network and
displays the corresponding print server names in the
Available Print-
ers
list.
●
Select
Clicking this button toggles the S flag setting on and off for the printer
that is currently selected in the
Available Printers
list. A printer whose
S flag is turned on appears in the
PORT
list of the printer
Properties
dialog box, where it can be selected. The initial start up default is S flag
on for all printers in the
Available Printers
list. Up to 30 S flags can
be turned on at any one time.
●
Available Printers
This is a list of all the printers detected on the network. You can clear
this list by clicking the
Clear
button. Then you can update the list by
clicking the
Find Printers
button.
The following describes the three fields of the
Available Printers
list.