Filter
Top Products
12
Using Telnet to Make Settings
12-62 Pi4700e
Appendix Chapter 12
6. Change Password
E. Exit
5
Input the number of the menu item you want check, set, or change,
and then press .
Menu Items
IP Parameters
Select this menu item to change the Network Card IP address, subnet
mask, default gateway, and base port number. Whenever the Network
Card detects that IP parameters have been changed, it automatically
starts a soft reset.
✎
Note
The base port number is a number that is one less than the actual
TCP/IP port number used by the printer. To set a port number of
10001, for example, you would specify 10000 as the base port num-
ber.
The Telnet connection is cut when a soft reset is performed. Because
of this, you should make other settings first and leave IP parameter
settings until later.
LPD Printers
Select this menu item to specify the emulation (printer interpreter lan-
guage) supported by the printer. Changing this setting lets you make
changes so lpd can print for other emulations.
Protocols
Select this menu item to specify the emulation (printer interpreter lan-
guage) supported by the printer. You can also disable NetWare or Apple-
Talk.
Reset Unit
Select this menu item to reset the Network Card. Note that resetting the
Network Card initializes the network interface without effecting the printer
interface.
Enter