Filter
Top Products
8
NetWare configuration
8-6 Pi4700e
Network Interface Card Chapter 8
Confirming the Bindery Context
Before installing the Network Card under Novell NetWare 4.x in the bind-
ery emulation mode, you should first confirm whether the server has a
bindery context (name assigned to the server by the bindery services
mode). If it doesn’t, install in the NDS mode.
Bindery context is required to install the Network Card in the bindery em-
ulation mode. Use the following procedure to confirm whether your server
has bindery context.
1
On the NetWare 4.x server, type:
load install
2
Select
Maintenance/Selective Install
from the menu.
3
On the
Installation Options
menu, select
NCF File Options
.
4
From the menu of available NCF file options, select
Edit
AUTOEX-
EC.NCF
.
5
Search the file and check to see if it contains a statement similar to the
one shown below.
SET BINDERY CONTEXT=OU=ENG
OU=ENG
is an example file server context. Use your own file server
context in place of
OU=ENG
.
6
At the console prompt, type the
SET BINDER CONTEXT
statement
exactly as you entered it in your AUTOEXEC.NCF file.
✎
Note
The command you type at the console prompt takes effect immediate-
ly. The contents defined in the AUTOEXEC.NCF file take effect when
the server is shut down and then restarted.
Enter