Filter
Top Products
Print options
6
Pi4700e 6-29
Printer Driver for Macintosh Chapter 6
✎
Note for (8)
If the Folding function is to be used, turn Off Staple and make the Sta-
ple setting under Folding.
If Staple is set, printed pages are fed out into the Elevator Tray.
The stapling position may be at the upper left or upper right corner de-
pending on the orientation of the paper and printing.
If the number of sheets of paper exceeds the limit that the Multi-staple
Finisher, Single-staple Finisher or Mailbin Finisher can handle, the
stapling function may be canceled. For details, see the machine User
Manual.
If the original document for a print job contains a page of a different
size from the others and this document is printed, the Staple setting
may be canceled.
If the original document for a print job contains a page with a different
orientation from the others, care should be used because the stapling
position is determined according to the direction of the first page.
It is possible that an option cannot be selected because of the paper
size. For details, see the User Manual of the machine.
• Half Folding + Staple Folds printed pages in two and staples them together.
• Half Folding + Punch Folds printed pages in two and punches holes in them.
• Half Folding + Staple,
Punch
Folds printed pages in two, staples them together, and
punches holes in them.
• Z-folding Folds printed pages into three parts.
• Z-folding + Corner Sta-
ple
Folds printed pages into three parts and staples them
at the corner.
• Z-folding + Long Edge
Staple
Folds printed pages into three parts and staples them
together.
• Z-folding + Punch Folds printed pages into three parts and punches holes
in them.
• Z-folding + Corner Sta-
ple, Punch
Folds printed pages into three parts, staples them at
the corner, and punches holes in them.
• Z-folding + Long Edge
Staple, Punch
Folds printed pages into three parts, staples them to-
gether, and punches holes in them.
(11)
OHP Interleaving
Select whether to insert a sheet of paper between sheets of OHP transparencies on
which prints have been made.
• Off Does not perform OHP Interleaving.
• Tray1 to Tray4, LCC,
LCT
Specify the paper source for the interleaves.
(12)
Front Cover Page
Lets you use paper for the cover of a different type (such as colored paper) from that
for the text pages of your copy sets.
• Off Feeds paper for all pages of your copy sets from the
paper source specified in Paper Source.
• Manual Feed, Tray1 to
Tray4, LCC, LCT
Specify the paper source for the cover.