Filter
Top Products
NetWare configuration
8
Pi4700e 8-7
Network Interface Card Chapter 8
Configuring in the Bindery Mode
After you confirm that your server has a bindery context, use the following
procedure to configure the Network Card.
1
Log into the server where you want to install the print server as super-
visor or as a user with equivalent privileges.
2
Type
PCONSOLE
and press to display the
Available Options
screen.
3
Press to enter the bindery mode.
✎
Note
If a message appears telling you to log in with bindery connection, it
means that the attached server does not have bindery mode enabled.
Either perform the procedure under “Confirming the Bindery Context”
or log onto a server with bindery services enabled.
4
On the
Available Options
screen, select
Quick Setup
and then press
.
Use Quick Setup to connect the print server, print queue, and printer
you want to use. You will be able to change this settings later if you
want.
5
Select
Print Server
and then press to modify the entry.
6
Type the name of the print server you want to use into the
New print
server
field, and then press .
Enter
F4
Enter
F3
Enter