Filter
Top Products
8
NetWare configuration
8-22 Pi4700e
Network Interface Card Chapter 8
4
At the
Printer Agent Source
field, select
Create a New Printer Agent
and click the
Create
button.
This causes the Create Printer Agent dialog box to appear.
5
Confirm the Printer Agent name (default is the name of the new printer
you are creating) and browse to select the NDPS Manager you want
to assign it to.
6
In the
Gateway Types
window, select the
Novell Printer Gateway
.
The Novell PDS dialog box opens.
7
Configure the Novell PDS by selecting the Printer Type and Port Type.
Then click the
OK
button.
This starts the
Configure Novell Port Handler
configuration wizard.
8
Configure the Connection Type as
Remote
(LPR on IP) and click the
Next
button.
9
Specify the IP address of your host and click the
Finish
button.
10
Select the printer driver for each client operating system.
❍
When users install this printer, these drivers will be automatically
downloaded to their workstations.
❍
If you choose a Windows 3.x driver but not a Windows 95 or Win-
dows NT driver, a 16-bit driver will be selected. Normally this does
not create problems.
❍
If the driver you need is not listed, rather than adding the driver to
the RMS, you can choose
None
from the top of each list. Users will
then be asked to provide a disk with the appropriate driver the first
time they install this printer on their workstations.
11
Click the
Continue
button.
The main browser window appears with your new controlled-access
printer listed.