Filter
Top Products
8
Using the utility software
8-34 Pi4700e
Network Interface Card Chapter 8
NIManage for AppleTalk (Macintosh)
This program lets you change Network Card settings on a Macintosh. It
provides the following functions.
●
Modification of printer name and zone name using AppleTalk
●
Enabling and disabling of status page output
●
Error log referencing
●
Enabling and disabling of other protocols, along with display of TCP/
IP address, subnet mask, and default gateway address (all of which
can be changed)
●
Operating System: Macintosh System 7.5.3 to 9.x, except Mac OS X
Using NIManage
1
On the computer you want to use, copy
AppleTalk NIManage Utility
Program
to the folder you want.
❍
AppleTalk NIManage Utility Program
is located in the
APPLTLK
folder on the CD-ROM.
2
Double-click the
AppleTalk NIManage Utility Program
to start up the
program and display the screen shown below.
❍
Zone
shows the names of the zones on the network.
❍
Device
shows the Network Cards available in each zone.
✎
Note
The Device display panel is blank if there are no zones on the network.
3
On the
Zone
display panel, select a zone name.