Filter
Top Products
Setup tab
4
Pi4700e 4-11
Properties Settings Chapter 4
Functions of the Detail of Paper Source dialog box
This function sets the cover page function and the OHP interleaving func-
tion.
✎
Notes for (1)
When using special paper, such as thick paper, the paper sometimes
fails to be distributed to the selected paper exit destination.
You can set Manual Feed, Tray1 to Tray4, LCC and LCT using Paper
Source.
(1)
Cover Page
This function is used to print a document with front and back cover pages. You can
print on the front cover, or leave it blank.
• Front Cover Page Activates the front cover function.
• with Image (Front Cover
Page)
Prints on the front cover.
• Back Cover Page Adds a back cover.
• with Image (Back Cover
Page)
Prints on the back cover.
• Cover Paper Source Select the tray for the front cover and back cover pa-
pers.
Available settings: Manual Feed, Tray1 to Tray4, LCC,
LCT
(2)
Interleaving Paper
This function inserts sheets (interleaving sheets) between sheets of OHP film when
printing on OHP film. You can either leave these sheets blank or print the same image
as that printed on the OHP film.
• OHP Interleaving Activates the OHP interleaving function.
• with Image Prints an image on the interleaving sheet.
• Interleaving Paper
Source
Select the tray for the interleaving paper.
Available settings: Tray1 toTray4, LCC, LCT
(1)
(2)