Filter
Top Products
12
UNIX Configuration
12-34 Pi4700e
Appendix Chapter 12
AIX 4.0
Use the following procedure to install a Network Card on an AIX 4.0 sys-
tem.
1
Run SMIT Printer.
2
Select
Print Spooling
.
3
Select
Add a Print Queue
.
4
Select
Remote
.
5
Use
Standard Processing
.
6
Assign the queue name.
7
Use the Network Card host address for Remote System.
8
Assign an appropriate name (like
PORT1
) for the queue on the remote
system.
9
Type in a description of the printer. This information is optional.
10
Press to apply what you have input and create the queue.
11
Execute the following command to produce a test print.
lp -d<queue name> <file name>
Configuration complete if the test prints without any problems.
HP-UX
Use the following procedure to set up a remote computer on the host that
sends jobs to a Network Card using Network Card lpd.
1
At the prompt, type:
sam
2
On the window that appears, select
Printer/Plotter Manager
.
3
On the menu, select
List printer and plotters
.
4
On the list that appears, select
Actions
from the title bar and then se-
lect
Add Remote Printer
on the menu that appears.
Enter