Filter
Top Products
102
Chapter 4 Emulation Menu
Slew Relative
“Slewing” is rapid vertical paper movement. This parameter determines the
number of lines slewed (either 1-15 lines or 1-16 lines) when an EVFU Slew
Relative command is received.
IGP/PGL Emulation
The IGP/PGL emulation can be configured either through the printer’s front
panel or from the host computer with control codes. For a detailed description
of configuration with control codes, see the PGL Technical Reference
Manual. For information on configuring the emulation through the printer’s
front panel, see the submenu below and the parameter descriptions that
follow.
EMULATION
(from page 80)
Define CR
Code
Define LF
Code
Autowrap
Select SFCC
PI Slew
Range
CR Edit
Select Font
Select LPI
Auto
Uppercase
Skip Cmd
Prefix
Power on
IGP/PGL
CR = CR*
CR = CR + LF
LF = LF*
LF = CR + LF
Disable*
Enable
126*
(1-255)
16*
15
Disable*
Enable
0*
(1-31)
6.0*
8.0
9.0
10.0
Disable*
Enable
Enable*
Disable
Enable*
Disable
* = Factory Default
Ext Execute
Copy
UPC
Descenders
Ignore Char
IGP100
Compatbl.
Optimized
Ratio
Disable*
Enable
Enable*
Disable
Ignore Mode
Disable*
Enable
Select Char
0*
(0-255)
Disable*
Enable
Disable*
Enable
Compressed
CPI
Disable*
Enable
IGP/PGL &
LP+
Error Report
On*
Debug Mode
Fault
Off