Filter
Top Products
Auto Switching Submenu
125
Ethernet Params Menu
The ETHERNET PARAMS menu helps your printer communicate on a
network.
For information on assigning the IP Address, Gateway Address, Subnet
Mask, and MAC Address, refer to
Μετηοδσ Οφ Αδϕυστινγ Παπερ
Ποσιτιον ον παγε 170.
You may also enable or disable the Novell or NetBIOS Protocols within this
menu, as well as selecting which Novell Frame scheme is used in processing
Novell signals. See Chapter 11, “Novell Configuration” for more details.
If the printer is connected to the Remote Management Software (RMS), the
RMS Port number and PPM Port Timeout settings must match the settings in
the Remote Management Software program.
IP Address
A numeric address such as 123.45.61.23 which identifies a printer or server in
a LAN or WAN.
ETHERNET
PARAMS
IP Address
Gateway
Address
Subnet Mask
MAC Address
Novell
Protocol
NetBIOS
Protocol
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx hhhhhhhhhhhh
Enable*
Disable
Enable*
Disable
Novell Frame
PPM Port
Number
PPM Port
Timeout
Ethernet 802.2*
802.2 Snap
Auto Sensing
Ethernet II
Ethernet 802.3
3001*
(0-65535)
100 secs.*
(1-255)
Ethernet
1
Speed
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
* Factory Default
1
If you change the Ethernet speed setting,
you must also change the switch or hub
setting to match.