Filter
Top Products
Saving Your New Configuration
57
Table 7. Saving Configurations
Step Key Result Notes
1. Make sure the printer is on. Raise the printer cover (on cabinet models).
2.
3. Allows you to make configuration
changes.
4.
5.
6.
7. Press until the desired number
(1-8) displays.
NOTE: Do not turn off the printer while save is in progress because you might lose your
configuration.
8. The configuration is now saved in
memory. (In this case, config. 2.)
9.
NOTE: It is recommended you print the configuration (see page 59 for the procedure). If you
decide not to print the configuration, then continue with the following steps.
10. Locks the ENTER key.
11.
12. Close the printer cover. The printer is ready for operation.
ON LINE
OFFLINE
CONFIG. CONTROL
+
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
CONFIG. CONTROL
Load Config.
UNTIL
CONFIG. CONTROL
Save Config.
Save Config.
1*
OR
Save Config.
2
ENTER
Save Config.
2*
UNTIL
CONFIG. CONTROL
Save Config.
+
ENTER SWITCH
LOCKED
ON LINE
ONLINE